即表示您同意我们的 条款细则隐私政策

    深圳市南山区粤海街道粤美特大厦902 房

    Tessera Processor Software 3.3.1

    21st 3月 2022
    3.3.1 Issue A
    Processor Firmware
    Tessera Remote
    Tessera Control

    Compatibility Note

    Tessera HD processors (M2, T1 and S4) must be running processor firmware V2.3.2 or later prior to upgrading to V3.0.1 or later.

    The packs included with 3.1 support new functionality, meaning they are not compatible with 3.0 or earlier releases.
    M2/T1/S4 upgrade warning

    Tessera HD processors (M2, T1 and S4) must be running processor firmware V2.3.2 or later prior to upgrading to V3.0.1 or later, or the upgrade will fail requiring a SD card restore.

    Processor Compatibility

    The Tessera S8 processor requires software version 3.0 or later.


    PureTone builds on Brompton’s Dynamic Calibration technology to enable each panel type to be profiled to measure the panel’s behaviour across the entire brightness range. PureTone then compensates for any non-linearities, ensuring true, clean, accurate colours and neutral grey scales. PureTone has been an available feature since software version 3.0, but has been updated in v3.3 to include support for per batch measurement.Rental companies know all too well about the problems of matching different batches of LED panels. Despite being the same type and being calibrated to the same brightness, colour temperature and colour targets, all too often a new batch of LED panels will be noticeably different at low brightness when displaying real world content. This is often because of low brightness non-linearities, which per batch PureTone is designed to correct.PureTone measurements only need to be taken using a single panel per batch of LED inside a dark room. That allows a profile to be generated which can be used for the entire batch. Measurements are made using a kit available from Brompton Technology – contact your sales representative for more information.Once you have obtained a PureTone profile for a specific batch of LED, uploading this information to the panels is done by using the processor user interface.Insert a USB stick containing the PureTone profile into the processor, then in canvas mode, select the corresponding panels and in the Device window on the right hand side, press the Change.. button to display a window where the user can select and upload the newly created PureTone profile.For more information on availability of the PureTone equipment and the process please contact support@bromptontech.com 


    LED panel design is all about trade-offs between different aspects of visual performance. Pushing for a faster refresh rate may mean reducing PWM bit depth. Increasing maximum brightness may compromise low brightness performance. Panel manufacturers seek to achieve a good balance, and that one-size-fits-all configuration is set for the life of the panel.But what if your particular application means you care more about one aspect of performance than others? Why shouldn’t you be able to choose a configuration that meets your particular requirements? Well, now you can with Operating Modes, available from Tessera version 3.3 onwards.All panels will have a default operating mode that aims for a balance across all aspects of performance – suitable for general-purpose use. But where appropriate, we can now support alternative operating modes for a panel type that prioritise a particular aspect of performance, and users can switch between modes instantly from the processor’s user interface, inside the Device window of a selected LED panel.OPERATING MODES UIStudio Mode is a long-standing Tessera feature allowing users to sacrifice maximum brightness in order to increase bit depth for better performance at low brightness. Studio Mode is now just one of numerous possible Operating Modes that allow tailored performance for particular situations. Each Operating Mode can also store its own PureTone correction, to ensure colour accuracy whichever mode you are using.Not every panel type will instantly have lots of operating modes. We will work with panel manufacturers to create new modes where we see a clear opportunity to increase one aspect of performance beyond what is possible in the default mode. Users can contact our support team to enquire about adding other operating modes if they have a specific requirement.


    From v3.3, Brompton SX40 and S8 processors, used together with R2 receiver cards, support the use of on-screen tracking markers for use with the Mo-Sys StarTracker system. The StarTracker system usually uses retroreflective marker stickers which are typically positioned on the ceiling – and this is an issue in volumes where there is an LED ‘roof’ overhead.The markers are automatically generated and overlaid on the video content being displayed, with the ability to configure colour and size of the markers from within the processor UI.Frame Rate Multiplication is used to display the markers on the output frames that are not visible to the main camera.As with Frame Rate Multiplication there are processor capacity implications due to the higher output frame rate used to display the video content and overlaid tracking markers.The StarTracker system, camera system, video content source and processors must be genlocked together.The StarTracker camera must be pointing at the LED screen that you wish to generate a tracking marker starfield on and must not have an IR filter fitted.To generate a StarTracker starfield click the ‘Enable StarTracker’ checkbox in the StarTracker section in Network property editor. It will also be necessary to switch on the Frame Rate Multiplication section. Increasing the multiplier increases the number of frames that you can choose to have the markers on.In this example the digital cinema camera frame rate is 25 fps. The camera and LED processor are genlocked together with Trilevel Sync Reference In at 25Hz. The Frame Rate Multiplier is x4 which gives an output frame rate of 100Hz. The tracking markers have been selected to be displayed on frames 2 and 4 of the sequence of 4 frames. This gives good performance on camera as well as the markers being completely flicker-free to the eye on the LED screen.Background Gain: This dims the video underneath the tracking markers. At 100% the video is at full brightness, at 0% it is completely black. The brightness of the tracking markers in unchanged.Blackout Affects Markers: If this option is unticked, the blackout function will only affect the video and not the markers.Distance to Tracker: This is the distance from the tracking markers to the StarTracker camera.Marker Size Scaler: This scales the size of each marker without changing the position of the tracker or layout of the StarTracker star map. This is different to changing the Distance to Tracker value which would affect each markers position.Marker Gain: This sets how bright markers are. E.g., If the Red Marker Gain is set to 100%, the red marker is displayed at the maximum brightness of the red LEDs. If the Red Marker Gain is set to 50% the red marker is displayed at 50% of the red LED brightness.Star Map Seed: This is the seed value that is used by the random number generators in each panel. Changing the seed will change the position of each marker for that colour. Using the same seed on two different processors allows the same star map to be generated. Using a different seed will force a different star map on each processor.

    Video content with Red StarTracker markers overlaid


    The SX40 and S8 processors now support the ACEScg colour space, which uses the ACES AP1 wide -gamut primaries. By supporting ACEScg and AP1 primaries, colour space conversion can be avoided in the source device, which avoids potential losses in precision and gamut reduction.When using AP1 the video input can be encoded as SDR, PQ HDR or HLG HDR. NB scene-referred (linear) ACEScg is not supported.ACEScg is automatically detected using HDMI InfoFrames by the processor when sent from a source over HDMI 2.0. ACEScg can also be selected manually in the same way as other colour spaces.

    ACEScg can be selected by clicking on the ACEScg tab.

    ACEScg is also featured in the Dynamic Calibration screen.Dynamic Calibration reports produced when LED panels are Hydra calibrated now feature the ACEScg colour space.

    Tessera processor IP Control API additions

    We have added several additional endpoints to our IP Control API. These endpoints add additional control over video input parameters such as colour space, HDR format, PQ gain, bit depth, quantisation range, chroma subsampling and proc amp settings such as black level, contrast, RGB highlights and shadow and hue and saturation.We have also added endpoints for StarTracker, Failover trigger, Genlock phase offset, custom test pattern colours and system reboot or shutdownFull details are available in our API documentation

    Test Pattern Improvements

    It is now possible in Test Patterns to create a custom colour with up to 12-bit precision. Values can be either entered by decimal or hexadecimal.

    Known Issues

    S4 firmware reloadWhen upgrading an S4 processor to/from 3.1.0.BETA4 firmware, after firmware reload has finished, the processor will not reboot automatically and will require a manual reboot. After reboot, the processor will operate as normal.Version compatibilityIn order to use V3.0.1 or later, it is necessary to run all elements of the system (processor, XDs and panels) on V2.3.1 or later. For panels where V2.3 firmware is not available please continue using V2.2 processor firmware.Restore factory defaults/format SD card can cause fixture library instability​If you perform either of these operations please reboot your processor before browsing to the fixture library window as this may otherwise be unstable.​Settings from Tessera Control are not applied to newly discovered fixturesIf using Tessera Control to alter Brightness, Temperature or Gamma, these settings are not sent to newly discovered fixtures until a change is made to the value.Tessera Remote and Tessera Control may not work on Mac OSX El CapitanWhen running on a Mac OSX El Capitan the Tessera Remote and Tessera Control applications can fail to detect network ports. This appears to be limited to cases where no default gateway is specified on the computer’s network interface. In situations where no default gateway is set using DHCP, we recommend specifying a default gateway manually. PCs running Windows and Macs running OSX Yosemite or earlier are not affected.​Tessera Remote may fail to import project filesIn some cases, Tessera Remote may fail to import project files from local storage. As a workaround create the project from scratch or use a local monitor, keyboard and mouse to import the project file before connecting with Tessera Remote.​Some input devices on KVM switches do not workWe have had reports that trackpads may not function correctly when connected to the processor via a KVM switch. As a workaround we recommend using a mouse, or connecting input devices directly to the processor’s USB ports.​​Monitors connected via DisplayPort-to-VGA adapters may be unstableLocal user interface monitors connected to the processor via certain active DisplayPort-to-VGA adapters may give an unstable image or the monitor is not detected at all. As a workaround we recommend using a DVI or DisplayPort monitor.