The 4K Tessera SX40 LED processor combines our industry-leading feature set and easy-to-use software interface with our highest-ever capacity processor.
Tessera SX40 offers support for full 4K screens at 60Hz with 12 bits per colour output. It supports a zero-latency up/down scaler that matches the source to the screen as well as all of Tessera’s industry-leading processing features. These include HDR and Dynamic Calibration as well as Ultra Low Latency, HFR+ (High Frame Rate), Frame Remapping, and more.
It is compatible with all existing Tessera fixture inventory.
Used in combination with the Tessera XD Distribution unit, the SX40 provides a cost-effective and powerful system for supporting the biggest and boldest LED projects.
ShutterSync tunes the LED screen to the camera, not the other way around, giving back creative flexibility for camera configuration.
Import a 3D LUT directly into your Tessera software project file, for advanced colour management capabilities.
Frame Remapping makes it possible for multiple cameras to each see different content when viewing the same LED screen at the same time.
HFR+ offers the power to play video content on an LED screen at up to 250 fps (frames per second).
Ultra Low Latency reduces the end-to-end latency to just 1 frame, providing a solution for broadcast television and film industries.
High Dynamic Range offers greater brightness and colour ranges with a higher bit depth, appearing perceptibly sharper and more detailed for vivid, lifelike images.
Provides real-time compensation for thermal artefacts such as pink/cyan pin-cushioning, and gradients due to swapped modules.
Limitations in the driver chips, LEDs and panel electrical design can be overcome to ensure neutral colour balance across the entire greyscale.
Improves the appearance of panels operating at less than their maximum brightness by reducing banding and increasing the detail in dark areas.
On-Screen Colour Adjustment (OSCA) enables a special user interface to appear on the LED screen itself, allowing for quick, easy module and seam selection.
Offers powerful and intuitive colour correction with two operating modes – 14 Way Colour Corrector and Colour Replace. Easily and independently adjust primary, secondary and tertiary colours.
The Tessera system is genlocked from the video input all the way down to the LED refresh cycle, giving perfectly smooth video with no dropped or doubled frames.
Delivers ultimate peace of mind for users by introducing an auto-failover mechanism that allows a back-up processor to take over in just a few seconds.
Tessera Management Software gives you full control over your Tessera System, with an array of powerful, easy-to-use features for an impeccable show every time.
Unusual shows have unusual content. With the Tessera SX40 you can build a screen of almost any size and dimension and be sure that your content plays beautifully on it.
For complete flexibility and creative control, the Tessera SX40 processor accepts custom input resolutions.
Redundancy delivers ultimate peace of mind for users by introducing an auto-failover mechanism that allows a back-up processor to take over in just a few seconds.
Tessera LED processors can be fed from the same or independent video sources, with different formats, resolutions, and/or frame rates.
There’s no requirement for any aspect of the sources to match – redundancy will ensure a near-seamless show even in the event of a power or cable failure.
The R2 Receiver Card is the most powerful Tessera receiver card ever, supporting a 262k pixel capacity, making it perfect for all types of LED panels.
See and compare the capacities and features of all Tessera LED Processors.
Download the Tessera SX40 processor datasheet .pdf with full product technical specifications.
Download the latest version of the Tessera software and firmware.
Brompton’s first 4K processor and the best LED processor currently available on the market. Used with the XD Data Distribution Unit to provide a comprehensive solution for 4K screens.
A mid-range processor perfect for high-profile projects that don’t require large output capacity but want the full suite of Tessera processing features.
A straightforward powerhouse processor built for large, high resolution LED screens, offering fewer creative features for competitive value.
Designed for creativity, an ideal choice for smaller creative shows and displays that don’t need to output a huge amount of pixels.
- 482.6mm (19”) x 88.9mm (3.5”) x 406.4mm (16”)
- Rear width: 431.8mm (17”)
- 550mm (21.65”) x 220mm (8.66”) x 520mm (20.5”)
- 7.50Kg (16.53lbs)
- 10Kg (22lbs)
- Switched autoranging power supply
- 100 – 240V AC
- 50Hz – 60Hz
- 1.2 – 0.6A
- One HDMI 2.0 input
- Full 18Gbps HDMI 2.0 bandwidth, maximum 600MHz pixel clock
- Up to 4096 x 2160 resolution (progressive only)
- 23.98Hz to 250Hz framerate
- 8,10 and 12 bits per channel colour depths
- RGB and YCbCr 4:4:4, 4:2:2 and 4:2:0
- Compatible with DVI-D and DisplayPort sources via adapters
- One 12G SDI input that supports the following:
- HD-SDI – ST-292
- 3G-SDI – ST-424, Level A and Level B-DL
- 6G-SDI – ST-2081
- 12G-SDI – ST-2082, 2SI format
- Up to 4096 x 2160 resolution (progressive only)
- 23.98Hz to 60Hz framerate
- 10 bits per channel colour depth
- YCbCr 4:2:2
- Four 10GBASE-T copper output ports
- Supports nominally 9 million pixels at 36 bits per pixel @ 60Hz
- Supports Neutrik etherCON Cat 6A / etherCON (CAT5e) connectors
- Compatible with standard Cat6A / Cat5e RJ45 connectors
- Requires Cat6A cable (up to 60m) or Cat5e cable (upto 30m)
- Four 10GBASE-LR Tessera XD fibre output ports
- Supports Neutrik opticalCON DUO / DUO ARMORED / DUO X-TREME / DUO LITE connectors
- Compatible with standard LC-Duplex connectors
- Requires 1310nm, 9/125um single-mode fibre (up to 2KM) with PC or UPC connectors
- Each 10G output independently auto-switches between fibre and copper
- Closed loop redundancy support
- Processor redundancy support
- Bi-level and Tri-level sync
- Sync to source
- Processors genlock from source right through to panel refresh
- Frame rates from 23.98 to 60Hz
- 2 frames end-to-end system latency (all features)
- Local management using monitor, keyboard and mouse connected directly to processor
- Up to 3840×2160 local monitor resolution supported, minimum 1920×1080 recommended
- Available free for Windows PC and Mac OS
- Remote management using Windows PC or Mac connected to processor via Ethernet network
- Two Gigabit Ethernet management network ports
- Support for eDMX protocols:
- Streaming ACN
- DMX-512A on 5-pin XLR in and thru
- Tessera Control application for multi-processor control via management network ports
- IP Control
- Two USB 2.0 ports on front
- Two USB 3.0 ports on rear
- One DisplayPort (DP++) monitor output supporting HDMI, DVI and VGA with adapter
- Six status LEDs
- Power LED
- Freeze button
- Blackout button
- Two years
- CE, ETL/cETL